| [CFP/MTU] 압출공정에 의한 수 처리용 평관형알루미나 필터의 미세구조와 특성평가 | |
|---|---|
| 작성자 : 삼보과학 작성일 : 2015-02-05 조회수 : 3369 | |
| 파일첨부 : 재료연구소 논문(배병서 하장훈 송인혁)_2014_세라믹학회지_알루미나필터.pdf | |
|
한국기계연구원 부설 재료연구소 송인혁, 하장훈, 배병서 박사님께서 세라믹학회지에 발표하신 논문을 소개합니다.
제목 : Characterization and Microstructure of an Extruded Flat-Tubular-Type Alumina Filter 압출공정에 의한 수 처리용 평관형알루미나 필터의 미세구조와 특성평가 [ABSTRACT] In this study, flat-tubular-type alumina filters were manufactured using alumina powder of two sizes (2.4 μm ALM-44 and 0.4 μm AP 400) by an extrusion process. The manufactured alumina filter was sintered at 1200 - 1600ºC for 1 h. As particle size increased, the largest pore size, average pore size and porosity increased; but density and linear shrinkage decreased. The alumina filter fabricated using ALM-44 powder sintered at 1500ºC was confirmed as the best water treatment filter after investigation of the bending strength, water permeability and impurity-removal efficiency of the experimental filters. This flat-tubular-type alumina filter is expected to be useful not only for direct water treatment, but also for use as a support filter during coating processes, to control pore size. Key words : Alumina, Extrusion, Bending strength, Water permeability, Impurity collecting 본 논문의 전문을 보시고자 하시는 분은 첨부 화일을 다운로드하여 보시기 바랍니다. |
|
| 이전글 | [S4031] Online & Portable Particle Counter의 적용사례(오일, |
|---|---|
| 다음글 | [SBSS] 광차폐방식을 이용한 고점성샘플의 입자 측정 논문 - AAPS Journal(2014) |
|
|
고객지원 > 종합자료실
|
|
